Designed for non-fixtured tumble coating of ferrites and elastomer parts and other small components

PTC vacuum deposition Parylene coating systems are designed for efficient production coating. Pressure and temperature values are pre-programmed and automatically controlled, giving unskilled operators the ability to achieve precise and repeatable results.

Key Features

The modular nature of PTC 4000H coating system design additionally allows users to select from multiple chamber configurations using the same generator, for the utmost in production flexibility. For example, an optional vertical chamber allows this tumble coating system to handle static part coating as needed. System modularity boosts overall production capacity and allows for fast, simple separation of the generator and deposition sections to facilitate maintenance. Chamber, vacuum system, rotational drive and cold trap are separate components for convenient service.

With the largest deposition chamber in place, the PTC 4000H coating system can be used to Parylene coat up to 80 lbs. of substrates per cycle. The horizontal tumbler is set to rotate at a speed that provides maximum exposure of surfaces to the monomer gas while avoiding substrate damage. The coating chamber is mounted on a rail mechanism to speed the loading and unloading of the tumbler. Tumble coating is a fast and cost-effective means for coating unfixtured components with an even and controlled layer of Parylene.

Chamber Dimensions: The standard chamber size is 16" internal diameter by 30" long (405mm x 762mm). The chamber can hold tumblers with different dimensions to ensure maximum production efficiency. Custom chamber configurations are available.

Cold Trap: The system can be configured with a two stage mechanical chiller or alternative cooling methods per customer specifications.

Vacuum System : Mechanical, direct drive, rotary vane pump 13.4 cfm or 20.9 cfm (16m³h^-l or 25m³h^-l) depending on size of chamber selected. Oil mist after filter is standard and 99% effective. Electropneumatic operation of control and vent valving are standards.

Minimum Floor Space Requirement : 8' x 10'

Electrical Requirements: 208 volts, three-phase, 4 or 5 wire and ground, 5 kW. CE compliant. International configurations available.

Weight: 700 lbs to 800 lbs (318 kg to 363 kg)

Standard size. Available to customer specifications.

PTC reserves the right to change specifications without notice.

For additional information or to place an order, call (800) 999-4942 or submit an Order Request form.

PTC 4000H Spare Parts